Message for the Day…” ‘seva’ is the highest path of Devotion which wins the Grace of God…”

Sathya Sai Baba

Today, we are confronted everywhere by statistics parading quantities and reports in glowing terms. Do not bother about adding to the number or achieving a target. I value quality, not quantity. Genuine and intensive devoted service offered in a few spots or villages is more fruitful than superficial service offered to a large number. Convince yourselves that life cannot continue long without others serving you and you serving others. Every relationship – be it master-servant, ruler-ruled, guru-disciple, employer-employee, or parents-children and so on – is bound by mutual service. Everyone is a sevak (servitor). The farmer and labourer whom you serve, produce by their toil your food and clothing as their service to you. Remember that the body, with its senses-mind-brain complex has been awarded to you to be used for helping the helpless. Seva is the highest of paths of Devotion which wins the Grace of God. Service promotes mental purity, diminishes egoism and enables one to experience, through empathetic understanding, the unity of mankind.

Mysore Gets India’s First Visually -Handicapped Friendly Railway Station …

Mysuru Railway Station has become the first railway station in India to be visually impaired friendly.

With the aim of helping visually impaired passengers travel independently, features like tactile maps and train schedules in Braille were unveiled at the station.

mysuru1

Source: Twitter

Anuprayaas, a non-government organization working for the welfare of visually challenged persons, along with south-western railway officials, started working on this project about a month ago. The first phase was inaugurated on November 3, and two more phases are being planned. The installations at the station include the following:

  • Tactile maps to give people an idea about the physical layout of the station. It is basically a map with raised surfaces that describes the distance and location of the entrance, platforms, counters, washrooms etc. The map informs people where they are, which side to turn and how many steps to take to reach a help desk.
  • Train itinerary sign board that provides train names their schedules in Braille. These are fixed signboards and do not provide real time information like electronic boards.
  • 400 metallic Braille signs have been installed at about ten places on each platform. Placed along the railing of the staircase leading to various platforms, they provide directions and platform information.
  • Restaurants, canteens and food plazas in the railways station will not have Braille menu cards too.

27-year-old Pancham Cajla is the founder of Anuprayaas, and he started working on this project along with five of his friends. Mysuru MP, Pratap Simha, inaugurated the facility.

“As a part of the railway department, I went to organizations and met blind people. We asked them about what they would expect from a blind-friendly railway station,” Arun Kumar Singh, Telecom engineer with the South-Western Railways who helped in the execution of the project, told The News Minute.

During the testing period, the NGO brought many visually impaired people to check the features. Until people became aware of this facility, volunteers from the NGO will help the passengers. Anuprayaas is planning to go digital, improve the tactile maps, and introduce more disabled friendly battery cars in the second phase.

Embedded image permalink

Sowmya visually challenged girl inaugurating tactile map of mysuru station with all utilities & train time table

https://twitter.com/DrmMys

Source…. Tanaya Singh ….www.the better india .com

Natarajan

THAT TIME A COMMERCIAL AIRCRAFT RAN OUT OF FUEL MID-FLIGHT- THE GIMLI GLIDER….

On July 23, 1983, in the small town of Gimli, Manitoba, Captain Robert Pearson and Co-Pilot Maurice Quintal expertly glided a 100-ton Boeing 767 carrying 69 people to a safe landing without engines, air brakes or flaps, and minimal control of the aircraft.

Bad Math

The flight plan for Canada 143 that day began with a short jaunt from Montreal, Quebec to Ottawa, Ontario. Right from the beginning, the crew realized the plane had a faulty fuel control: “A computer known as the Fuel Quantity Information System Process manages the entire fuel loading process. . . . But the FQIS was not working properly on Flight 143.”

With FQIS out-of-order, the ground maintenance crew had to calculate the amount of fuel needed, in a process called “dipping the tanks.”

Wisely taking all precautions, the flight crew also checked the maintenance crew’s fuel calculations, three times in fact, and each time, the calculations matched.

After reaching Ottawa, and preparing for the 2,800 kilometer trip to Edmonton, Alberta, Pearson apparently sensed something was off and asked that the plane be “re-dipped.”  The ground refuelers stated that the tanks had 11,430 liters of fuel.  When Pearson and Quintal crunched the numbers, they came up with approximately 20,400 kilos of fuel on board, which all seemed correct.  The truth is, though, they only had about 9,144 kilos.

The problem was that the original ground crew, and the flight crew (twice!), had forgotten that the new airliner used the metric system (as Canada was in the process of switching to the metric system, so the new planes purchased by Air Canada were being calibrated in metric units); as a result, they had all erroneously used the figure 1.77 lbs/liter for their specific gravity factor in the calculations, but what they should have used was 0.8 kg/liter.

Bottom line, this meant that the plane was filled with only about half of the fuel it needed to make the trip.

Oh No!

Shortly after dinner:

The first warning light came on. Flight 143 was . . . at 41,000 feet and 469 knots at the time . . . . ‘At that point . . . We believed we had a failed fuel pump in the left wing, and switched it off. . . . . When a second fuel pressure warning light came on, Pearson felt it was too much of a coincidence and made a decision to divert to Winnipeg.

 

Just minutes later, another pressure gauge “lit up,” and they lost their left engine. Two minutes after that: “The EICAS issued a sharp bong – indicating the complete and total loss of both engines. . . . ‘It’s a sound that Bob and I had never heard before.’ . . . . Starved of fuel, both . . . engines had flamed out. Pearson’s response, recorded on the cockpit voice recorder, was ‘Oh fuck.’”

After a quick perusal of the manuals, which had no procedures for a loss of both engines, the pilots quickly realized their only hope was to somehow glide the plane to a safe landing. Luckily for the passengers aboard, while he’d never tried gliding a Boeing 767, Pearson was an extremely experienced glider pilot.

Of course, while a Boeing 767 is perfectly capable of gliding to some extent, even fully loaded, many of the systems within the plane were not designed to run without the engines. Thus, a byproduct of the engines dying was the loss of many of the systems and instruments on the plane due to lack of electricity, leaving them with only basic instruments.

One of the many key things that shut off was the radar transponder, meaning that traffic controllers on the ground at Winnipeg’s airport had to use a ruler placed on the radar screen to determine the distance traveled by the aircraft in a given time, which could then be combined with the rate of descent to figure out how far the plane could go.

If the loss of many of the instruments wasn’t bad enough, most critical of all was the loss of hydraulic pressure. Without it, the pilots would have no control at all.  Because of this, the Boeing 767 is equipped with a “ram air turbine” which is automatically deployed in cases like this, providing a very small amount of hydraulic pressure- the faster the plane is going, the better this hydraulic pump would work as the turbine spun faster.  Of course, as the plane slows for a landing, hydraulic pressure drops, and so does the pilot’s ability to control the plane.  But that’s a problem for later.

At this point, the plane was losing altitude at a rate of approximately 2,000 feet/minute, but at least the pilots could still control it.

Because of the sink rate, the pilots and controllers after crunching the numbers all agreed the plane would never make it to Winnipeg, but:

An abandoned Royal Canadian Air Force Base . . . was 12 miles away . . . Quintal was familiar with it because he’d been stationed there in the service. Unknown to him and the controllers . . . Runway 32L . . . had become inactive and . . . a steel guard rail had been installed down most of the southeastern portion. . . . This was the runway Pearson would ultimately try and land on…

A Forward Slip

Upon approaching the runway at the old Gimli base, Pearson and Quintal realized they were too high. They then performed a common maneuver in small aircraft called a forward slip, which is to bank into the wind, then apply opposite rudder to keep the plane flying straight, rather than turning; this results in the plane descending more rapidly without increasing airspeed. While commonly done in personal aircraft, this is a very rare maneuver for commercial craft.

Although somewhat risky, this was the pilots’ only option since the flaps and dive-brakes required power from the now-inoperable engines. While all pilots are well familiar with this maneuver (in fact it’s generally required before you can go on your first solo flight in personal aircraft), Pearson had a wealth of experienceperforming the forward slip maneuver, thanks to not only frequently piloting gliders, but also years of experience towing them: “After releasing the glider, I would have this long tow line hanging under the plane, and I had to be careful not to snag it on the farmer’s fence as I approached the runway. So I would stay high until I cleared the fence, and then did a steep slip to make the runway.”

The Landing

The lack of hydraulic pressure had another downside, they couldn’t control the landing gear.  Thus, they performed another atypical procedure of a “gravity drop” of the wheels.  As a result, as the nose gear was dropping into the wind, it didn’t lock in place.

Another problem was that, unknown to the pilots, the abandoned runway had been converted to a recreational center, including auto and go-cart racing. In one of the many weird coincidence of the day, July 23, 1983, was the “Family Day” for the Winnipeg Sports Car Club: “Go-cart races were being held on one portion of runway 32L and just past the dragstrip another portion of the runway served as the final straightaway for a road course. Around the edges of the straightaway were cars, campers, kids and families in abundance…”

In what must have been a surreal moment for all of them: “Trees and golfers were visible out the starboard side passengers’ windows as the 767 hurtled toward the threshold at 180 knots, 30-50 knots faster than normal . . . . A passenger reportedly said, ‘Christ, I can almost see what clubs they are using…’”

Quintal did not realize the people were present on the runway until the point of no return, so he didn’t say anything. Pearson simply hadn’t noticed.  Pearson’s obliviousness to the potential human tragedy wasn’t negligence on his part, rather, in order to land the plane: “His attention was totally concentrated on the airspeed indicator [and operating the plane. In fact,] he never even saw 32R, focusing instead on airspeed, attitude, and his plane’s relationship to the threshold of 32L.”

The plane had also become increasingly difficult to control as its speed decreased and the turbine providing the hydraulic pressure slowed its spinning.

Nevertheless, they managed to glide in safely and as the plane touched down: “Spectators, racers, and kids on bicycles fled the runway. The gigantic Boeing was about to become a 132 ton, silver bulldozer. One member of the . . . Club reportedly was walking down the dragstrip, five gallon can full of hi-octane fuel in hand, when he looked up and saw the 767 headed right for him.”

Pearson laid heavily on the wheel brakes directly after touching down and: “Two tires blew out. The nose gear . . . collapsed . . . the nose . . . slammed against the tarmac, bounced [and threw a] three hundred foot shower of sparks. The right engine nacelle struck the ground . . . . The 767 came to a stop . . . less than a hundred feet from spectators, barbecues and campers…”

Although some people were hurt exiting the plane, due to the now contorted angle of its emergency exits, none of the 61 passengers, 8 flight crew or people on the ground suffered any serious injury.

Source….www.today i foundout.com

Natarajan

Looking Back: International Space Station at the Start of Expedition 1….

International Space Station in December 2000 with modules and solar arrays visible

On Nov. 2, 2000, the Expedition 1 crew — Commander William M. (Bill) Shepherd of NASA and Flight Engineer Sergei Krikalev and Soyuz Commander Yuri Gidzenko of Roscosmos — arrived at the International Space Station, marking the start of an uninterrupted human presence on the orbiting laboratory. Their Soyuz capsule made contact with the aft docking port of the station’s Zvezda Service Module at 3:21 a.m. CST while the two spacecraft were flying over the central portion of Kazakhstan. A little over one hour later at 4:23 a.m., the hatch leading into the Zvezda’s living quarters was opened, signifying the start of human occupancy of the international complex. Gidzenko and Krikalev floated into Zvezda first, at the request of the commander. Once inside the station, the crew members continued the work begun by space shuttle crews and ground controllers to bring the station to life.

Fifteen years later, 45 crewed expeditions (so far) — more than 220 people from 17 countries — have visited the station, constructed over more than 115 space flights conducted on five different types of launch vehicles. The station now measures 357 feet end-to-end and provides more livable room than a conventional six bedroom house. 22 scientific investigations were conducted during Expedition 1, while a total of 191 scientific investigations will be conducted during Expeditions 45 and 46. To date, more than 1,200 scientific results publications have been produced based on over 1,760 research investigations on the orbiting laboratory.

This Dec. 2, 2000, photograph shows the configuration of the space station at the start of Expedition 1 including the Zarya Control Module, Unity Node, Zvezda Service Module and Z1-Truss. It was taken by STS-97 crewmembers aboard shuttle Endeavour during approach to dock with the station on a mission to deliver and connect the first set of U.S.-provided solar arrays, prepare a docking port for arrival of the U.S. Laboratory Destiny and perform additional station assembly tasks. The Expedition 1 crew spent four months living and working on the station and returned to Earth aboard shuttle Discoveryon March 21, 2001.

Image Credit: NASA

Source…www.nasa.gov

Potholes Could Soon Be a Thing of the Past….Thanks to Thermocol….!!!

Potholes on the streets of almost all cities in India don’t just make our rides uncomfortable, but also cause fatal accidents. According to the Road Accident Report (2014) published by the Road Transport and Highways Ministry, 6,672 people lost their lives due to potholes and badly designed speed breakers last year.

However, if the ministry goes ahead with its latest proposal of using thermocol fill in place of soil as the base for construction, pothole complaints can soon be resolved.

Photo Credit: Flickr

In a meeting headed by Union Minister Nitin Gadkari last month, the ministry asked some consultancy firms to submit cost analysis report of the use of Geofoam for construction on highways, in comparison with the conventional soil fills. An expert committee was constituted earlier this year to recommend new materials for construction of highways.

Geofoam is primarily used to provide lightweight void fill on highways, during road constructions, for building embankments, parking lots constructions, etc. It is basically expanded polystyrene (EPS) or extruded polystyrene (XPS) manufactured into large lightweight blocks. Polystyrene is one of the most widely used plastics around the world. And EPS is a rigid closed-cell foam structure made of pre-expanded polystyrene beads. It is widely used for manufacturing daily utility goods like plates, boxes, bowls, packaging material, etc. XPS also consists of closed cells, and it provides higher stiffness to materials it is used in, like craft and architectural models.

Countries like Europe, Japan, and the US have been using Geofoam for road construction. In India, the Border Road Organization has been using it for constructing roads on difficult terrains. Geofoam requires less manpower as it is all about lifting the sheets and placing them at the required spot. It is approximately 1% the weight of soil and less than 10% the weight of other lightweight fill alternatives. Because of being so light, Geofoam also reduces the weight applied on the underlying soil or solid structure. It can also be easily cut and shaped as per the requirement giving engineers the freedom to be more specific about the design. Additionally, it is very durable and does not break down. So the material does not spread to the surrounding soil thereby keeping a check on pollution.

Keeping these advantages in mind, the ministry has issued an order that project reports for all future road construction projects should consider alternative design combinations. With the use of thermocol, a brand of Geofoam, the cost of road repairs can be reduced by 30 percent, and the time required can also be significantly decreased.

 

 

“The best part is that Geofoam is 100 times lighter than the soil and does not expand or contract with changing temperatures like extreme winter or heat. It does not get washed away by floods or landslides. We are using large amounts of healthy soil for road construction, which could be avoided if we use Geofoam,” a senior ministry official told The Indian Express. –

Source…….Tanaya Singh…www.the betterindia.com

natarajan

Message For the Day…” By Conscious Effort, One’s habits can be changed and character refined …”

Among the qualities that make up a flawless character, love, patience, forbearance, steadfastness, and charity are the highest and noblest. The hundred little deeds that we indulge in every day harden into habits; these habits shape the intelligence and mould our outlook and life. One’s present is but the result of one’s past and the habits formed during that long period. But whatever be the nature of the character that one has inherited, it can certainly be modified. Nobody’s wickedness is incorrigible. Wasn’t robber Angulimala, turned into a kindhearted person by Lord Buddha? Didn’t thief Rathnakara become Sage Valmiki? By conscious effort, habits can be changed and character refined. People always have within them, the capacity to challenge their evil propensities and to change their habits. By selfless service, renunciation, devotion and prayer, old habits that bind people to earth can be discarded and new habits that will take them along the divine path be instilled.

Sathya Sai Baba

THE ORIGIN OF THE NAMES OF THE CONTINENTS….

Today I found out the most likely origin of each of the continents’ names. (Using the seven continent model)

world

First on this list is Africa. There are many different theories as to the origin of Africa’s name. After the Romans defeated Carthage (which is in modern-day Tunisia in Northern Africa) in the third Punic War, they called their new province “Africa.” The most popular theory as to the origin of the name is that it was named for a native tribe there—the Afri, with “Africa” then being the feminine form of “Africus”, literally meaning “land of the Afri”.

An alternate theory, which has a hole in it due to when the name was first used, is that it comes from the Phoenician word “afar” which means “dust.” Put together with the Latin suffix –ica, sometimes used to denote “land”, the name could mean “a land of dust.” Given Africa’s hot, desert-like climate in the north, which is where the Romans claimed their province, the Phoenician root is considered by many to be a plausible alternative to the “Afri tribe” theory, for the origin of Africa’s name.

Whatever the case, as Europeans continued exploring and discovered the breadth of the continent, the name that the Romans had originally used for their small province stuck, and the entire continent became known as Africa.

Antarctica comes from the Greek word “antarktike,” which literally means “opposite to the north.” The continent is, of course, home to the southernmost point on Earth. John George Bartholomew, a Scottish cartographer, is believed to be the first person to use “Antartica” to refer to the continent. However, the name was used for a different place by the French before this. In the 1500s, they held a colony in Brazil below the equator which they named France Antartique.

Asia derives from the Ancient Greek “Ἀσία”, which was used as early as 440 B.C. by Herodotus in his Histories. However, it is likely that the name was in use long before then, though not referring to a whole continent, but rather originally just the name for the land on the east bank of the Aegean Sea, and then later the Anatolia (part of modern Turkey).

Romans referred to two provinces when talking about Asia: Asia Minor and Asia Major. A common theory is that the Greek name ultimately derived from the Phoenician word asu, which means “east”, and the Akkadian word asu which means “to go out, to rise.” In reference to the sun, Asia would then mean “the land of the sunrise.”

Terra Australis Incognita means “the unknown land in the south” in Latin, and rumours of the continent’s existence dated back to Ancient Roman times. Of course, Romans did not have the maritime technology to reach Australia and did not have any direct evidence that it existed, as far as we know. When Europeans finally discovered the continent, the name “Terra Australis” stuck. The continent was referred to the shortened “Australia” by a number of early explorers, but it was Matthew Flinders who pushed for its use from 1804. Though “Australia” was used unofficially for several years, Governor Lachlan Macquarie petitioned for its official adoption in 1817. It wasn’t until 1824 that the name was officially given to the continent.

Europe was likely named after Europa, one of Zeus’ many lovers in Greek mythology. Legend has it that he abducted her after taking on the form of a white bull and took her to Crete.  It is difficult to determine the etymology of the name, but one theory is that it comes from the Akkadian word erebu which means “to go down, set” or the Phoenician ereb which means “evening, west.” The western directional meaning would mean it had similar origins to Asia. Alternatively, the name Eurpoa may have derived from the Greek “eurys”, meaning “wide”, and “ops”, meaning “face”, so “wide face”.

As in many of the other names of the continents, “Europe” originally didn’t refer to anything close to what we think of as Europe today.  Rather, it was just a small region, like “Asia”, referring to a portion of present day Turkey, part of Thrace.

Like most, I’ve known that the Americas (North and South) were named after Amerigo Vespucci since my early education. However, the story behind why this is the case is somewhat more interesting and quite a bit less well known. Vespucci was a navigator that traveled to “the new world” in 1499 and 1502. Being a well educated man, he realized that this new world was not part of Asia, as some had initially thought. Vespucci chose to write about his travels and his books were published in 1502 and 1504. Being both entertaining and educational, his accounts of the new world were reprinted in almost every European language.

In 1507, a German cartographer, Martin Waldseemüller, chose to make a new map that included the new world. He and two scholarly partners were aware of Vespucci’s writings and were ignorant of Columbus’s expeditions. As such, they decided to name the new land after Vespucci, stating:

But now these parts (Europe, Asia and Africa, the three continents of the Ptolemaic geography) have been extensively explored and a fourth part has been discovered by Americus Vespuccius (the Latin form of Vespucci’s name), I do not see what right any one would have to object to calling this part after Americus, who discovered it and who is a man of intelligence, and so to name it Amerige, that is, the Land of Americus, or America: since both Europa and Asia got their names from women.

When the large new map, approximately 8 feet by 4 feet, was unveiled by Waldseemüller, it had the large title “AMERICA” across what is now present day Brazil. Waldseemüller used Vespucci’s travelogues as a reference for his drawing and so his map had South America as the only part of this new western hemisphere. When North America was later added, the mapmakers of the time retained the original name. In 1538, the famous geographer Gerard Mercator chose to name the entire north and south parts of America as one large “America” for the entire western hemisphere

Bonus Facts:

  • Part of Antartica has been named “Queen Elizabeth Land” in honour of Queen Elizabeth II. The area is about twice the size of the United Kingdom.
  • Captain James Cook was sent to find Terra Australis Incognita in 1772. Returning with charts of the eastern coastline of Australia—large enough to be considered a continent—he was turned down by officials who believed that the real Terra Australis Incognita was located farther south. Cook set out again and was the first person to sail into the Antarctic Circle. However, he turned away to resupply his ship before seeing land. If he had succeeded in his voyage, it is likely that Antarctica would have been named Australia after Terra Australis instead. (The first person to see the Antarctic Continent was Fabian Gottlieb von Bellingshausen in 1820).
  • Europa is also the name of one of Jupiter’s moons.
  • An alternate theory as to how America got its name, not backed up by a whole lot of documented evidence, you may sometimes hear is that a tribe of Native Americans named the Amerrique may have existed, and both Columbus and Vespucci may have visited them. The word is said to originate from the Mayan word for “exceptionally strong wind.”
  • Another “America” theory that you may sometimes here, again, not backed up by nearly the evidence as the above in the main article, is that it was named after a Bristol merchant named Richard Amerike. Amerike and other merchants had been trading items and fishing off the coast of Newfoundland for many years before Christopher Columbus and John Cabot made their voyages to America. The theory is that the fishermen who worked for him named the area in which they lived after their employer. It is also believed that Amerike sponsored John Cabot on his successful trip to America’s eastern shore, and that Cabot named the land after his sponsor.

[Map Image via Shutterstock

Source….www.today i foundout.com

Natarajan

Photo Of The Day: This Is What The Driest Place On Earth Looks Like This Year !!!

Atacama Desert

Chile’s Atacama desert is the driest place on Earth, but this year it is filled with color.

The desert has the longest dry streak on record after it went 173 consecutive months without a single drop of rain in the early 1900s. But this year, the Atacama was breaking records of a different kind. One day in March, the Atacama got .96 inches of rain. That may not sound like much, but given that the desert’s average rainfall is about .07 inches per year, that one day in March was the equivalent of having 14 years of rain in a single day.

Thus we now have the stunningly pink malva flowers (pictured above), which bloom every five to seven years depending on the El Nino cycle. This year’s rainfall has been especially heavy, even for an El Nino year, and people are calling it the “most spectacular blossoming of the past 18 years.”

Source…..www.all-that-is-interesting.com

Natarajan

Once a Fruit Vendor, This 63-Year-Old Will Now Travel Across India in His Self-Designed Solar Car…….

I have no special talents. I am only passionately curious.” – Albert Einstein.

63-year-old Syed Sajjad Ahmed is a perfect example of how passion can drive people to do things that might be difficult to achieve. At an age when many would hesitate before trying something new, this enthusiastic man has started a journey across India to spread the message of a pollution free country. And he is doing this on a solar powered car that has been designed by him.

About 15 years ago, Syed came to Bengaluru from Kolar and started working as a fruit vendor. He then opened a small shop where he used to repair televisions and radio sets. He had a passion for innovation that slowly developed and he started making television antennas on his own. He even designed a two-wheeler for people with disabilities.

In 2004, Syed decided to take his ideas to the next level, and designed a solar-powered car.

Screen Shot 2015-11-02 at 12.49.36 pm

Photo: spinningthegreenwheel.wordpress.com

Now, with his solar car, this innovator has kick-started a campaign against pollution and corruption in India. He started on a journey from Raj Bhavan in Bengaluru on Nov. 1, 2015, and will cover a distance of 1,740 kilometres to reach the Rashtrapati Bhavan in Delhi. On his special car, which runs at a speed of 100 kms per hour, he will drive through Hindupur, Ananthpur, Kurnool, Mahaboobnagar, Hyderabad, Bhopal, Itarsi, Jhansi and Agra. His plan is to reach Delhi in a month and to participate in the India International Science Fair in the first week of December.

Syed says that he has dedicated this trip to Late APJ Abdul Kalam who has been his inspiration to make his dream a reality.

A school dropout, Syed spends one fourth of his earnings to design energy sufficient devices and another 25 percent on social service. Earlier, he had spent about four years and Rs. 10 lakh to develop electric two-wheelers and three- wheelers for differently-abled people, before making this solar-powered four-wheeler worth Rs. 50,000.

Back in 2012, Syed had travelled 1,000 kms in South India to spread awareness about a corruption-free India. “I want to further modify this car, refine and improvise it before I set out on my longest journey to cover more miles,” he had said at that time.

Source…..Shreya Pareek….www.the betterindia.com

Natarajan

 

” If there is A Will … There is a Way…”

If we cannot do what we will, we must will what we can. So, when residents belonging to a cluster of villages near Karnaprayag in Uttarakhand got tired of waiting for forest officials to clear a mountain road project, they decided to take charge. And in just 10 days, about 300 villagers built their own road connecting Bhatkwali with Bainoli village.

Men and women worked for almost eight to nine hours a day, and carved out a three kilometre long motorable road with basic tools like chisels and hammers. And they managed to do so without cutting even a single tree.

uttarakhand

Picture for representation only. Photo Credit: draskd/Flickr

“We strongly believe in strengthening the environment, and all of us had vowed not to raze any trees to build the road. Luckily, there were not many trees on the stretch,” Kunwar Singh, a 56-year-old ex-serviceman told The Times of India.

Ironically, they were told that the project was not being initiated because forest officials believed that it would involve shredding of trees. The road was supposed to be built under the Pradhan Mantri Grameen Sadak Yojna.

Most of these villagers come from the mountain regions of Bhatkwali, Chorasain and Bainoli near Karnaprayag. The villages are located at altitudes of 5,000 to 7,000 feet about sea level, and accessibility between them is very difficult. Thus, travelling for healthcare facilities or children’s education becomes a very troublesome task. So they formed a Sangharsh Samiti (Agitators’ Group), to solve their problem themselves. Women also played a very active role in this project

“All of us held a meeting, and decided that we will go ahead with the road construction ourselves. We followed the survey plan that officials had prepared for making the road. All the materials used were natural – like the sheets of rocky stones and mud from hill sides which were utilized to build the stone walls on both sides of the road. The villagers simply donated their time and effort and there was no substantial cost involved in the construction,” says Pushpa Devi, who was involved in the exercise.

Source…. Nisha Chawla….www.the betterindia.com

Natarajan